ST10F280_12 datasheet(30/239 Pages) STMICROELECTRONICS

30 / 239 page

Memory organization

ST10F280

30/239

Doc ID 8673 Rev. 3

XPERCON

Address:

0xF024h / 12h ESFR

Reset:

0x--05h

Type:

R/W

Note:

When both CAN and XPWM are disabled via XPERCON setting, then any access in the

address range 00’EC00h 00’EFFFh will be directed to external memory interface, using the

BUSCONx register corresponding to address matching ADDRSELx register. P4.4 and P4.7

can be used as General Purpose I/O when CAN2 is not enabled, and P4.5 and P4.6 can be

used as General Purpose I/O when CAN1 is not enabled.

The default XPER selection after Reset is: XCAN1 is enabled, XCAN2 is disabled, XRAM is

enabled, XPORT9, XTIMER, XPORT10, XPWM, XADCMUX are disabled.

setting of bit XPEN in SYSCON register.

XPWMEN

XPERCONEN3

XRAMEN

CAN2EN

CAN1EN

R/W

CAN1EN CAN1 Enable Bit

0: Accesses to the on-chip CAN1 XPeripheral and its functions are disabled. P4.5

and P4.6 pins can be used as general purpose I/Os. Address range 00’EF00h-

00’EFFFh is only directed to external memory if CAN2EN and XPWM bits are

cleared also.

1: The on-chip CAN1 XPeripheral is enabled and can be accessed.

CAN2EN CAN2 Enable Bit

0: Accesses to the on-chip CAN2 XPeripheral and its functions are disabled. P4.4

and P4.7 pins can be used as general purpose I/Os. Address range 00’EE00h-

00’EEFFh is only directed to external memory if CAN1EN and XPWM bits are

cleared also.

1: The on-chip CAN2 XPeripheral is enabled and can be accessed.

XRAMEN XRAM Enable Bit

0: Accesses to the on-chip 16K Byte XRAM are disabled, external access

performed.

1: The on-chip 16K Byte XRAM is enabled and can be accessed.

XPERCONEN3 XPORT9, XTIMER, XPORT10, XADCMUX Enable Bit

0: Accesses to the XPORT9, XTIMER, XPORT10, XADCMUX peripherals are

disabled, external access performed.

1: The on-chip XPORT9, XTIMER, XPORT10, XADCMUX peripherals are enabled

and can be accessed.

XPWMEN XPWM Enable Bit

0: Accesses to the on-chip XPWM are disabled, external access performed.

Address range 00’EC00h-00’ECFFh is only directed to external memory if CAN1EN

and CAN2EN are ‘0’ also

1: The on-chip XPWM is enabled and can be accessed.

ST10F280 Fiches technique(PDF) 30 Page - STMicroelectronics

ST10F280 Fiches technique(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Fiches technique Télécharger

Lien URL