DP80390 datasheet(82/84 Pages) DCD

82 / 84 page

DP80390 Instructions set details

- 82 -

All trademarks mentioned in this document

http://www.DigitalCoreDesign.com

are trademarks of their respective owners.

http://www.dcd.pl

3.44.

XRL

Instruction:

XRL <dest-byte>, <src-byte>

Function:

Logical Exclusive OR for byte variables

Description:

XRL performs the bit wise logical Exclusive OR operation between the

indicated variables, storing the results in the destination. No flags are

affected (except P, if <dest-byte> = A).

The two operands allow six addressing mode combinations. When the

destination is the accumulator, the source can use register, direct,

direct address, the source can be accumulator or immediate data.

Note:

When this instruction is used to modify an output port, the value used

as the original port data will be read from the output data latch, not the

input pins.

3.44.1.

XRL A, RN

Operation:

(PC)

← (PC) + 1

(A)

← (A) xor (Rn)

Bytes:

Cycles:

Encoding:

3.44.2.

XRL A, DIRECT

Operation:

(PC)

← (PC) + 2

(A)

← (A) xor (direct)

Bytes:

Cycles:

Encoding:

direct address

DP80390 Fiches technique(PDF) 82 Page - Digital Core Design

DP80390 Fiches technique(HTML) 82 Page - Digital Core Design

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

Fiches technique Télécharger

Lien URL