ILPS22QSTR datasheet(25/57 Pages) STMICROELECTRONICS

25 / 57 page

Digital interfaces

7.1

Serial interfaces

The registers embedded in the ILPS22QS may be accessed through either the I²C, MIPI I3CSM, or SPI serial

interfaces. The latter operates in 3-wire SPI interface mode.

The serial interfaces are mapped to the same pins. To select/exploit the I²C interface, the CS line must be tied

high (that is, connected to Vdd_IO).

Table 11. Serial interface pin description

Pin name

Pin description

Enables SPI

I²C and MIPI I3CSM / SPI mode selection

(1: SPI idle mode / I²C and MIPI I3CSM communication enabled;

0: SPI communication mode / I²C and MIPI I3CSM disabled)

SCL/SPC

I²C / MIPI I3CSM serial clock (SCL)

SPI serial port clock (SPC)

SDA

SDI/SDO

I²C / MIPI I3CSM serial data (SDA)

3-wire serial data input/output (SDI/SDO)

7.2

I²C serial interface (CS = high)

The ILPS22QS I²C is a bus slave. The I²C is employed to write data into registers whose content can also be read

back.

The relevant I²C terminology is given in the following table.

Table 12. I²C terminology

Term

Description

Transmitter

The device which sends data to the bus

Receiver

The device which receives data from the bus

Master

The device which initiates a transfer, generates clock signals and terminates a transfer

Slave

The device addressed by the master

There are two signals associated with the I²C bus: the serial clock line (SCL) and the serial data line (SDA). The

latter is a bidirectional line used for sending and receiving the data to/from the interface. Both lines have to be

connected to Vdd_IO through pull-up resistors.

The I²C interface is compliant with fast mode plus (1 MHz) I²C standards as well as with normal mode.

ILPS22QS

Digital interfaces

DS13431 - Rev 3

page 25/57

ILPS22QSTR Fiches technique(PDF) 25 Page - STMicroelectronics

ILPS22QSTR Fiches technique(HTML) 25 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Fiches technique Télécharger

Lien URL