NM1282KSLAXAL datasheet(32/120 Pages) NANYA

32 / 120 page

Version 1.3

Nanya Technology Corp.

06/2018

2Gb SLC NAND + 2Gb LPDDR2

NM1282KSLAXAL

NTC Proprietary

Level: Property

Internal addressing in relation with the Districts

To use Multi Page Program operation, the internal addressing should be considered in relation with the

District.

• The device consists from 2 Districts.

• Each District consists from 1024 erase blocks.

• The allocation rule is follows.

District 0: Block 0, Block 2, Block 4, Block 6,···, Block 2046

District 1: Block 1, Block 3, Block 5, Block 7,···, Block 2047

Address input restriction for the Multi Page Program with Data Cache operation

There are following restrictions in using Multi Page Program with Data Cache;

(Restriction)

Maximum one block should be selected from each District.

Same page address (PA0 to PA5) within two districts has to be selected.

For example;

(80) [District 0, Page Address 0x00000] (11) (81) [District 1, Page Address 0x00040] (15 or 10)

(80) [District 0, Page Address 0x00001] (11) (81) [District 1, Page Address 0x00041] (15 or 10)

(Acceptance)

There is no order limitation of the District for the address input.

For example, following operation is accepted;

(80) [District 0] (11) (81) [District 1] (15 or 10)

(80) [District 1] (11) (81) [District 0] (15 or 10)

It requires no mutual address relation between the selected blocks from each District.

Operating restriction during the Multi Page Program with Data Cache operation

(Restriction)

The operation has to be terminated with “10h” command.

Once the operation is started, no commands other than the commands shown in the timing diagram is allowed

to be input except for Status Read command and reset command.

NM1282KSLAXAL Fiches technique(PDF) 32 Page - Nanya Technology Corporation.