| Moteur de recherche de fiches techniques de composants électroniques |
|
AX2000 Fiches technique(PDF) 23 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
AX2000 Fiches technique(HTML) 23 Page - Microsemi Corporation |
|
23 / 262 page ![]() Axcelerator Family FPGAs Re vi s i on 18 2-9 I/O Specifications Pin Descriptions Supply Pins GND Ground Low supply voltage. VCCA Supply Voltage Supply voltage for array (1.5V). See "Operating Conditions" on page 2-1 for more information. VCCIBx Supply Voltage Supply voltage for I/Os. Bx is the I/O Bank ID – 0 to 7. See "Operating Conditions" on page 2-1 for more information. VCCDA Supply Voltage Supply voltage for the I/O differential amplifier and JTAG and probe interfaces. See "Operating Conditions" on page 2-1 for more information. VCCDA should be tied to 3.3V. VCCPLA/B/C/D/E/F/G/H Supply Voltage PLL analog power supply (1.5V) for internal PLL. There are eight in each device. VCCPLA supports the PLL associated with global resource HCLKA, VCCPLB supports the PLL associated with global resource HCLKB, etc. The PLL analog power supply pins should be connected to 1.5V whether PLL is used or not. VCOMPLA/B/C/D/E/F/G/H Supply Voltage Compensation reference signals for internal PLL. There are eight in each device. VCOMPLA supports the PLL associated with global resource HCLKA, VCOMPLE supports the PLL associated with global resource CLKE, etc. (see Figure 2-2 on page 2-9 for correct external connection to the supply). The VCOMPLX pins should be left floating if PLL is not used. VPUMP Supply Voltage (External Pump) In the low power mode, VPUMP will be used to access an external charge pump (if the user desires to bypass the internal charge pump to further reduce power). The device starts using the external charge pump when the voltage level on VPUMP reaches VIH1. In normal device operation, when using the internal charge pump, VPUMP should be tied to GND. 1. When VPUMP = VIH, it shuts off the internal charge pump. See "Low Power Mode" on page 2-106. Figure 2-2 • VCCPLX and VCOMPLX Power Supply Connect 1.5 V Supply Axcelerator Chip 0.1 μf 10 μf 250 Ω VCCPLX VCOMPLX |
|
Lien URL |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |