CY8C53_11 datasheet(17/106 Pages) CYPRESS

17 / 106 page

PRELIMINARY

PSoC® 5: CY8C53 Family Datasheet

Document Number: 001-66237 Rev. *A

Page 17 of 106

5.5 Memory Map

The Cortex-M3 has a fixed address map, which allows

peripherals to be accessed by simple memory access

instructions.

5.5.1 Address Map

The 4-GB address space is divided into the ranges shown in

Table 5-2:

The bit-band feature allows individual bits in words in the

bit-band region to be read or written as atomic operations. This

is done by reading or writing bit 0 of corresponding words in the

bit-band alias region. For example, to set bit 3 in the word at

address 0x20000000, write a 1 to address 0x2200000C. To test

the value of that bit, read address 0x2200000C and the result is

either 0 or 1 depending on the value of the bit.

Most memory accesses done by the Cortex-M3 are aligned, that

is, done on word (4-byte) boundary addresses. Unaligned

accesses of words and 16-bit half-words on nonword boundary

addresses can also be done, although they are less efficient.

5.5.2 Address Map and Cortex-M3 Buses

The ICode and DCode buses are used only for accesses within

the Code address range, 0 - 0x1FFFFFFF.

The system bus is used for data accesses and debug accesses

within the ranges 0x20000000 – 0xDFFFFFFF and 0xE0100000

– 0xFFFFFFFF. Instruction fetches can also be done within the

range 0x20000000 – 0x3FFFFFFF, although these can be

slower than instruction fetches via the ICode bus.

The private peripheral bus (PPB) is used within the Cortex-M3 to

access system control registers and debug and trace module

registers.

Table 5-2. Address Map

Address Range

Size

Use

0x00000000 –

0x1FFFFFFF

0.5 GB

Program code. This includes

the exception vector table at

power up, which starts at

address 0.

0x20000000 –

0x3FFFFFFF

0.5 GB

Static RAM. This includes a 1

MByte bit-band region

starting at 0x20000000 and a

32 Mbyte bit-band alias

region starting at

0x22000000.

0x40000000 –

0x5FFFFFFF

0.5 GB

Peripherals. This includes a 1

MByte bit-band region

starting at 0x40000000 and a

32 Mbyte bit-band alias

region starting at

0x42000000.

0x60000000 –

0x9FFFFFFF

1 GB

External RAM.

0xA0000000 –

0xDFFFFFFF

1 GB

External peripherals.

0xE0000000 –

0xFFFFFFFF

0.5 GB

Internal peripherals, including

the NVIC and debug and

trace modules.

Table 5-3. Peripheral Data Address Map

Address Range

Purpose

0x00000000 – 0x0003FFFF 256K Flash

0x1FFF8000 – 0x1FFFFFFF 32K SRAM in Code region

0x20000000 – 0x20007FFF 32K SRAM in SRAM region

0x40004000 – 0x400042FF Clocking, PLLs, and oscillators

0x40004300 – 0x400043FF Power management

0x40004500 – 0x400045FF Ports interrupt control

0x40004700 – 0x400047FF Flash programming interface

0x40004800 – 0x400048FF Cache controller

0x40004900 – 0x400049FF I2C controller

0x40004E00 – 0x40004EFF Decimator

0x40004F00 – 0x40004FFF Fixed timer/counter/PWMs

0x40005000 – 0x400051FF I/O ports control

0x40005800 – 0x40005FFF Analog Subsystem Interface

0x40006000 – 0x400060FF USB Controller

0x40006400 – 0x40006FFF UDB Configuration

0x40007000 – 0x40007FFF PHUB Configuration

0x40008000 – 0x400087FF EEPROM

0x4000A000 – 0x4000A400 CAN

0x40010000 – 0x4001FFFF Digital Interconnect Configuration

0xE0000000 – 0xE00FFFFF Cortex-M3 PPB Registers,

including NVIC, debug, and trace

Table 5-3. Peripheral Data Address Map (continued)

Address Range

Purpose

[+] Feedback

CY8C53 Fiches technique(PDF) 17 Page - Cypress Semiconductor

CY8C53 Fiches technique(HTML) 17 Page - Cypress Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Fiches technique Télécharger

Lien URL