| Moteur de recherche de fiches techniques de composants électroniques |
|
STV2050A Fiches technique(PDF) 52 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV2050A Fiches technique(HTML) 52 Page - STMicroelectronics |
|
52 / 83 page ![]() 52/83 STV2050A - CONVERGENCE Figure 28. Convergence Channel Structure Calibrated sources are used to generate the reference current for all CONVERGENCE and FOCUS DACs. The reference current is defined as . (Refer to Section 13 "CURRENT REFERENCE" on page 61.) The outputs can be disabled using the CDO bit in the E3 register. Notes: 1. The CDO bit is a common control for the convergence AND the focus outputs. 2. The CDN bit must be set to 1 for normal operation. Refer to Section 9.7 "MANUFACTURING, AFTER- SALES SERVICE, LAB TRIAL MODES" on page 49. In order to perform a “soft” start of the convergence to avoid damaging the amplifiers, a “Soft Switch On” of the DACs is carried out digitally by applying a reduced digital gain (reduction by factor 2) for at least 1 field after the DACs have been switched on from high impedance to normal operation (using the CDO bit) or when the DACs have been previously switched to the offset values by the slave bus. CDO 0: High impedance 1: Normal operation. DAxx DNxx + - Iref 2 --------- |
|
Lien URL |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |