RN131 datasheet(28/40 Pages) MICROCHIP

28 / 40 page

RN131/RN171/RN1723 Evaluation Kits User’s Guide

DS50002183B-page 28

 2013-2015 Microchip Technology Inc.

3.2.1.2

FACTORY RESET

In Factory Reset mode, an RN module is restored to the factory default condition.

As shown in Figure 1-1, Figure 1-2, and Figure 1-3 in 1.5 “RN Evaluation Board

Components”, the FN push button is used in conjunction with the RESET/RST

push button to perform a factory reset.

3.2.1.3

WPS

The Wi-Fi Protected Setup (WPS) mode allows the RN module to be associated to the

appropriate access point. WPS mode is entered by pressing and releasing the FN push

button while the launch_string configuration parameter is set to wps_app. By default,

the launch_string is set to web_app.

Refer to the “WiFly Command Reference, Advanced Features and Applications User’s

Guide” (DS50002230) for information. This document is available from the Microchip

web site at: http://www.microchip.com/wifi.

3.2.2

RESET/RST Push Button

When the RESET/RST push button is pressed, the RN module will briefly power down

and restart.

RN131 Fiches technique(PDF) 28 Page - Microchip Technology