PSD833F2 datasheet(51/128 Pages) STMICROELECTRONICS

51 / 128 page

PSD8XXFX

PLDS

Doc ID 7833 Rev 7

51/128

14.3

Complex PLD (CPLD)

The CPLD can be used to implement system logic functions, such as loadable counters and

shift registers, system mailboxes, handshaking protocols, state machines, and random logic.

The CPLD can also be used to generate three External Chip Select (ECS0-ECS2), routed to

port D.

Although External Chip Select (ECS0-ECS2) can be produced by any Output macrocell

(OMC), these three External Chip Select (ECS0-ECS2) on port D do not consume any

Output macrocells (OMC).

As shown in Figure 12, the CPLD has the following blocks:

●

24 input macrocells (IMC)

●

16 Output macrocells (OMC)

●

Macrocell Allocator

●

Product Term Allocator

●

AND Array capable of generating up to 137 product terms

●

Four I/O ports.

Each of the blocks are described in the sections that follow.

The input macrocells (IMC) and Output macrocells (OMC) are connected to the PSD

internal data bus and can be directly accessed by the MCU. This enables the MCU software

to load data into the Output macrocells (OMC) or read data from both the input and Output

macrocells (IMC and OMC).

This feature allows efficient implementation of system logic and eliminates the need to

connect the data bus to the AND Array as required in most standard PLD macrocell

architectures.

Obsolete

Product(s)

- Obsolete

Product(s)

PSD833F2 Fiches technique(PDF) 51 Page - STMicroelectronics