STMPE812 datasheet(32/51 Pages) STMICROELECTRONICS

32 / 51 page

Touchscreen controller

STMPE812

32/51

Doc ID 17732 Rev 3

TSC CTRL

TSC control register

Address:

0x40

Type:

R/W

Reset:

0x00

Description:

Touchscreen control register.

7654

MAV_MODE[2:0]

ACQ

Precharge[1:0]

Current Limit [1:0]

[7:5] MAV_MODE[2:0]

‘000’ – MAV Filter Disabled

‘001’ – 6 remove 2

‘010’ – 8 remove 4

‘011’ – 10 remove 2

‘100’ – 12 remove 4

‘101’ – 20 remove 4

‘110’ – 4 remove none (Equal to 4x oversampling)

‘111’ – 8 remove none (Equal to 8x oversampling)

[4] ACQ

Only valid in acquisition mode ‘01’ (acquisition initiated by system host writing to ACQ bit)

Writing ‘1’ to this bit initiates a TSC data acquisition

Writing ‘0’ has no effect

Reads ‘1’ if data acquisition is in progress

Reads ‘0’ if data is ready

If Data is already available in buffer and not read by system host, setting this bit to ‘1’ renders

the data in buffer “invalid”. DATA available bit in Interrupt Status register is reset by hardware

automatically. Pending interrupt due to DATA available (if any) is cleared.

Data pointer in multi-byte read operation is reset when this bit is written to.

[3:2] Precharge[1:0]

Pre-charge driver for touch detection

‘00’ – no pre-charge

‘01’ – 2 µs pre-charge

‘10’ – 4 µs pre-charge

‘11’ – 8 µs pre-charge

[1:0] Current Limit [1:0]

Current limit of touchscreen driver

‘00’ – 5 mA

‘01’ – 10 mA

‘10’ – 20 mA

‘11’ – 30 mA

Obsolete

Product(s)

- Obsolete

Product(s)

STMPE812 Fiches technique(PDF) 32 Page - STMicroelectronics

STMPE812 Fiches technique(HTML) 32 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Fiches technique Télécharger

Lien URL