CSG14K_CSG8K datasheet(77/114 Pages) AMSOSRAM

77 / 114 page

Document Feedback

CSG14K_CSG8K

Functional Description

Datasheet

• PUBLIC

DS000571

• v2-01 • 2023-Feb-10

113

│ 76

Attention

If the above equation is not respected, the sensor behavior is undefined and no warning or error

message is generated. It is the responsibility of the external controller to apply compliant register

settings.

The equation above specifies a minimum frame time. The maximum frame time is only

constrained by the limits of the relevant registers.

Attention

The sensor has an absolute minimal exposure time, which is image mode dependent (see

parameter texp,min in Figure 8 for applicable value).

Maximum Frame Rate Calculation

The maximum frame rate in any user configuration can be calculated with the formula below.

Refer to the previous section for the registers and formulas for the constituting times. The

maximum frame rate per image mode provided in Figure 8.

Equation 7:

�� =

��

�� + ��

Sequence Length

Figure 91:

Number of Frames Register

Bank

Addr

Bits

Description

NROF_FRAMES

[7:0]

See below

In triggered internal mode (CTRL_MODE = 2), every rising edge on REQ_EXP (through

external pin or register) will initiate the capture of a sequence of frames. The value in the

NROF_FRAMES register at the moment of the rising edge on REQ_EXP will determine the

sequence length.

NROF_FRAMES may be set to any value between 1 and 255. In all other control modes, the

CSG14K_CSG8K Fiches technique(PDF) 77 Page - ams-OSRAM AG