AFT09MS007NT1

27

RF Device Data

Freescale Semiconductor, Inc.

PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS

Refer to the following documents, software and tools to aid your design process.

Application Notes

 AN1955: Thermal Measurement Methodology of RF Power Amplifiers

Engineering Bulletins

 EB212: Using Data Sheet Impedances for RF LDMOS Devices

Software

 Electromigration MTTF Calculator

 RF High Power Model

 .s2p File

Development Tools

 Printed Circuit Boards

For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the

Software & Tools tab on the part’s Product Summary page to download the respective tool.

REVISION HISTORY

The following table summarizes revisions to this document.

Revision

Date

Description

0

June 2013

 Initial Release of Data Sheet

1

Apr. 2014

 Tape and Reel information: corrected tape width information from 13--inch reel to 7--inch reel to reflect

actual reel size, p. 1

 Maximum Ratings table: changed Total Device Dissipation value from 182 to 114 W to reflect performance

at 150C, p. 2

 Fig. 4, MTTF versus Junction Temperature – CW: MTTF end temperature on graph changed to match

maximum operating junction temperature, p. 4

 Table 6, Test Circuit Component Designations and Values: updated PCB description to reflect most current

board specifications from Rogers, p. 5

 Added 350–470 MHz UHF Broadband Reference Circuit as follows:

-- Wideband Performance table, p. 1

-- Table 8, UHF Broadband Performance, p. 8

-- Table 9, Load Mismatch/Ruggedness, p. 8

-- Fig. 10, UHF Broadband Reference Circuit Component Layout, p. 9

-- Table 10, UHF Broadband Reference Circuit Component Designations and Values, p. 9

-- Fig. 11, UHF Broadband Reference Circuit Schematic, p. 10

-- Table 11, UHF Broadband Reference Circuit Microstrips, p. 10

-- Fig. 12, Power Gain, Drain Efficiency and Output Power versus Frequency at a Constant Input

Power, p. 11

-- Fig. 13, Output Power versus Gate--Source Voltage, p. 11

-- Fig. 14, Power Gain, Drain Efficiency and Output Power versus Input Power and Frequency, p. 11

-- Fig. 15, VHF Broadband Series Equivalent Source and Load Impedance, p. 12

 Table 12. Load Mismatch/Ruggedness table: changed Test Voltage from 9.0 to 10.8 Vdc to reflect true

capability of the circuit, p. 13