MCS3142 datasheet(37/57 Pages) MICROCHIP

No de pièce	MCS3142

Description	MCS3142 Dual KEELOQ짰 Encoder Wireless Remote Control Development Kit

PDF	57 Pages

Scroll/Zoom	100%

Fabricant	MICROCHIP [Microchip Technology]

Site Internet	http://www.microchip.com

Logo

37 / 57 page

MCS3142 Dual KEELOQ® Encoder Wireless Remote Control Development Kit User’s Guide

DS40001746A-page 36

 2014 Microchip Technology Inc.

8.3

PC QUICK-START

8.3.1

Connecting to the board

Upon launching the application, a similar diagram will be displayed:

FIGURE 8-1:

MAIN LANDING SCREEN

Please note that the subsequent screen captures of the program may change in later

releases of the program software. A default Windows 7 look and feel was used for all

figures.

Place the jumper on J6 on the Embedded Security Development Board in its left-most

position to enable USB power.

Fit the SX1239 Receiver PICtail into its slot on the demo board.

Connect a USB cable into the Embedded Security Development Board. D2 should now

be lit. In Windows, a notification stating that the MCP2200 device was installed and

found successfully will show. If not, the MCP2200 driver may need to be installed

manually as stated in the Section 8.2 “Installation”.

MCS3142 Fiches technique(PDF) 37 Page - Microchip Technology