STMPE2403 datasheet(41/63 Pages) STMICROELECTRONICS

No de pièce	STMPE2403

Description	24-bit Enhanced port expander with Keypad and PWM controller Xpander logic

PDF	63 Pages

Scroll/Zoom	100%

Fabricant	STMICROELECTRONICS [STMicroelectronics]

Site Internet	http://www.st.com

Logo

41 / 63 page

STMPE2403

PWM controller

41/63

11.1

Registers in the PWM controller

The main system registers are:

Table 39. Main system registers

Address

Description

Auto-Increment

(during Read/Write)

0x30

PWMCS

PWM Control and Status register

Yes

0x38

PWMIC0

PWM instructions are initialized through this

data port. Every instruction is 16-bit width and

therefore, the MSB of the first word is written

first, then, followed by LSB of the first word.

Subsequently, MSB of second word and LSB of

second word and so on.

0x39

PWMIC1

PWM instructions are initialized through this

data port. Every instruction is 16-bit width and

therefore, the MSB of the first word is written

first, then, followed by LSB of the first word.

Subsequently, MSB of second word and LSB of

second word and so on.

0x3A

PWMIC2

PWM instructions are initialized through this

data port. Every instruction is 16-bit width and

therefore, the MSB of the first word is written

first, then, followed by LSB of the first word.

Subsequently, MSB of second word and LSB of

second word and so on.

STMPE2403 Fiches technique(PDF) 41 Page - STMicroelectronics