E5CC-RX2DBM-000 datasheet(126/138 Pages) OMRON

126 / 138 page

@C/E5@C-T

126

E5CC/E5CC-B/E5CC-U/E5CC-T

• E5CC/E5CC-T

There are two models of Terminal Covers that you can use with the

E5CC/E5CC-T.

• E5CC-U

For the Wiring Socket for the E5CC-U, purchase the P2CF-11 or

PG3A-11 separately.

1. For waterproof mounting, waterproof packing must be installed on

the Digital Temperature Controller. Waterproofing is not possible

when group mounting several Digital Temperature Controllers.

The E5CC-U cannot be waterproofed even if the Waterproof

Packing is inserted.

2. Insert the E5CC/E5CC-B/E5CC-U/E5CC-T into the mounting hole

in the panel.

3. Push the adapter from the terminals up to the panel, and

temporarily fasten the E5CC/E5CC-B/E5CC-U/E5CC-T.

4. Tighten the two fastening screws on the adapter.

Alternately tighten the two screws little by little to maintain a

balance. Tighten the screws to a torque of 0.29 to 0.39 N·m.

E5EC/E5EC-B/E5AC/E5EC-T/E5AC-T

1. For waterproof mounting, waterproof packing must be installed on

the Digital Temperature Controller. Waterproofing is not possible

when group mounting several Digital Temperature Controllers.

2. Insert the E5EC/E5EC-B/E5AC/E5EC-T/E5AC-T into the

mounting hole in the panel.

3. Push the adapter from the terminals up to the panel, and

temporarily fasten the E5EC/E5EC-B/E5AC/E5EC-T/E5AC-T.

4. Tighten the two fastening screws on the adapter.

Alternately tighten the two screws little by little to maintain a

balance. Tighten the screws to a torque of 0.29 to 0.39 N·m.

E5DC/E5DC-B

1. Insert the E5DC/E5DC-B into the mounting hole in the panel.

(Attach the Terminal Unit after you insert the Main Unit.)

2. Push the Adapter from the Terminal Unit up to the panel, and

temporarily fasten the E5DC/E5DC-B.

3. Tighten the two fastening screws on the Adapter. Alternately

tighten the two screws little by little to maintain a balance. Tighten

the screws to a torque of 0.29 to 0.39 N·m.

E5DC

Mounting to and Removing from DIN Track

• Mounting a Unit

Pull down the DIN Track hook on the Terminal Unit and catch the

top hook on the DIN Track.

Press the Unit onto the DIN Track until the DIN Track hooks are

locked in place.

• Removing a Unit

Pull down on the DIN Track Hook with a flat-blade screwdriver and

lift up the Unit.

Panel

Water Proof Packing

Terminal Cover

(E53-COV17)

(Sold separately)

Adapter

Terminal Cover

(E53-COV23)

Adapter

Panel

Water Proof Packing

Terminal Cover

(E53-COV24)

Terminal Cover

(E53-COV24)

Main Unit

Panel

Terminal Unit

Adapter

1. Pull down the hook.

2. Catch the top hook on

the DIN Track.

4. Make sure that the hooks

are locked in place.

3. Press the Unit onto

the DIN Track.

E5CC-RX2DBM-000 Fiches technique(PDF) 126 Page - Omron Electronics LLC

E5CC-RX2DBM-000 Fiches technique(HTML) 126 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Fiches technique Télécharger

Lien URL