STM32MP151A datasheet(46/253 Pages) STMICROELECTRONICS

46 / 253 page

Functional overview

STM32MP151A/D

46/253

DS12500 Rev 3

3.33.8

Generic timers (Cortex-A7 CNT)

Cortex-A7 generic timers embedded inside Cortex-A7 are fed by value from system timing

generation (STGEN).

The Cortex-A7 processor provides a set of four timers:

•

Physical timer for use in secure and non-secure modes. The registers for the physical

timer are banked to provide secure and non-secure copies.

•

Virtual timer for use in non-secure modes.

•

Physical timer for use in hypervisor mode.

Generic timers are not memory mapped peripherals, they are accessible only by specific

Cortex-A7 coprocessor instructions (cp15).

3.34

System timer generation (STGEN)

The system timing generation (STGEN) generates a time count value that provides a

consistent view of time for all Cortex-A7 generic timers.

The system timing generation has the following key features:

•

64-bit wide to avoid roll-over issues.

•

Starts from zero or a programmable value.

•

A control APB interface (STGENC) enables the timer to be saved and restored across

powerdown events.

•

Read-only APB interface (STGENR) enables the timer value to be read by non-secure

software and debug tools.

•

The timer value incrementing can be stopped during system debug.

STGENC can be defined (in ETZPC) as accessible by secure software only.

3.35

Real-time clock (RTC)

The RTC provides an automatic wakeup to manage all low-power modes.

The real-time clock (RTC) is an independent BCD timer/counter. The RTC provides a time-

of-day clock/calendar with programmable alarm interrupts.

The RTC includes also a periodic programmable wakeup flag with interrupt capability.

Two 32-bit registers contain the seconds, minutes, hours (12- or 24-hour format), day (day

of week), date (day of month), month, and year, expressed in binary coded decimal format

(BCD). The sub-seconds value is also available in binary format.

Compensations for 28-, 29- (leap year), 30-, and 31-day months are performed

automatically. Daylight saving time compensation can also be performed.

Additional 32-bit registers contain the programmable alarm subseconds, seconds, minutes,

hours, day, and date.

A digital calibration feature is available to compensate for any deviation in crystal oscillator

accuracy.

After backup domain reset, all RTC registers are protected against possible parasitic write

accesses.

STM32MP151A Fiches technique(PDF) 46 Page - STMicroelectronics

STM32MP151A Fiches technique(HTML) 46 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Fiches technique Télécharger

Lien URL