Absolute maximum rating

STV7623

10/27

Doc ID 018939 Rev 1

4

Absolute maximum rating

Stressing the device above the rating listed in the “absolute maximum ratings” table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the operating sections of

this specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

Table 5.

Symbol

Parameter

Value

Unit

Digital supply range

-0.3 to +4.0

V

VP

Positive voltage supply

-0.3 to +50

V

VN

Negative voltage supply

+0.3 to -50

V

Vp-Vn

Voltage difference

90

V

Logic input voltage range

mV

1.

Measurements done on one single output, x. The other outputs are either not used or are connected to

output x. Assumes junction temperature remains less than Tjmax during measurement.

2.

All transient current measurements are made under conditions close to those encountered in a typical

application (that is, with duration of any output current spike always less than 300 ns).

3.

These parameters are measured during STMicroelectronics’ internal qualification which includes

temperature characterization on standard as well as corner batches of the process. These parameters are

not tested in production.

- 70 to +35

mA

Diode output current

(1) (2) (3)

-200 to +300

mA

Output voltage range

-0.3 to +90

V

ESD susceptibility, human body model (100 pF

discharged through 1.5 K

2kV

Maximum junction temperature

-40 to +100

°C

Storage temperature range

(die)

-65 to +150

°C