| Moteur de recherche de fiches techniques de composants électroniques |
|
PAPR1 Fiches technique(PDF) 9 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
PAPR1 Fiches technique(HTML) 9 Page - Clarke International |
|
9 / 24 page ![]() 9 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com ATTACHING THE BREATHING HOSE Insert the hose connector into the blower receptacle until snug and then turn 1/8 turn to the right to lock it into place. 1. Welding helmet 2. Face seal 3. Headgear terminal 4. Breathing Hose terminal 1 5. Breathing Hose 6. Breathing Hose terminal 2 7. Blower receptacle 8. Belt 9. Blower body Insert the breathing hose terminal into the headgear terminal and turn the hose clockwise until the breathing hose locks in position. TESTING THE AIR FLOW ALARM Disconnect the breathing hose from the hood. Start the blower and block the air flow by placing your hand over the end of the breathing hose. Continue blocking the air flow until the alarm sounds and the blower vibrates. If the alarm does not sound and the blower does not vibrate, check the battery and filter element. |
|
Lien URL |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |