5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

5. Make sure that the left and right

dividers are orientated as

shown above.

6. Place the top panel in place

and use the fixings (nuts, bolts

and washers) supplied to

secure in place.

7. Repeat this with the bottom

and two side panels.

•

Do not tighten fully at this stage.

8. Lift the top slightly and insert the

doors as shown.

•

The hinge pins on the door must

be inserted into the holes in the

top and bottom panels.

9. Fully tighten all fixings.