6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Supply voltage

26

V

Analog inputs, VIN+, VIN– (2)

Differential (VIN+) – (VIN–)

–26

26

V

Common-mode(3), INA199Ax

GND – 0.3

26

Common-mode(3), INA199Bx and INA199Cx

GND – 0.1

26

REF input

GND – 0.3

(V+) + 0.3

V

Output(3)

GND – 0.3

(V+) + 0.3

V

Input current Into all pins(3)

5

mA

Operating temperature

–40

125

°C

Junction temperature

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

VIN+ and VIN– are the voltages at the IN+ and IN– pins, respectively.

(3)

Input voltage at any pin c an exceed the voltage shown if the current at that pin is limited to 5 mA.

6.2 ESD Ratings

VALUE

UNIT

INA199A1, INA199A2, and INA199A3 in DCK and RSW Packages

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per JEDEC specification JESD22-C101(2)

±1000

INA199Bx and INA199Cx in DCK and RSW Packages

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±3500

V

Charged-device model (CDM), per JEDEC specification JESD22-C101(2)

±1000

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

INA199

SBOS469H – APRIL 2009 – REVISED OCTOBER 2023

www.ti.com

4

Submit Document Feedback

Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: INA199