VL6180 datasheet(62/73 Pages) STMICROELECTRONICS

62 / 73 page

Device registers

VL6180

62/73

DocID024986 Rev 14

6.2.42

RESULT__RANGE_RETURN_CONV_TIME

Address:

0x07C

Type:

Reset:

0x0

Description:

6.2.43

RESULT__RANGE_REFERENCE_CONV_TIME

Address:

0x080

Type:

Reset:

0x0

Description:

6.2.44

READOUT__AVERAGING_SAMPLE_PERIOD

Address:

0x10A

Type:

R/W

Reset:

0x30

Description:

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10

9876543210

result__range_return_conv_time

[31:0]

result__range_return_conv_time: sensor count output value attributed to signal on the Return

array.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10

9876543210

result__range_reference_conv_time

[31:0]

result__range_reference_conv_time: sensor count output value attributed to signal on the

Reference array.

654

321

readout__averaging_sample_period

R/W

[7:0]

readout__averaging_sample_period: The internal readout averaging sample period can be

adjusted from 0 to 255. Increasing the sampling period decreases noise but also reduces the

effective max convergence time and increases power consumption:



Effective max convergence time = max convergence time - readout averaging period (see

Section 2.6: Range timing). Each unit sample period corresponds to around 64.5 µs additional

processing time. The recommended setting is 48 which equates to around 4.3 ms.

VL6180 Fiches technique(PDF) 62 Page - STMicroelectronics

VL6180 Fiches technique(HTML) 62 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Fiches technique Télécharger

Lien URL