TMUX7411F datasheet(6/30 Pages) TI

6 / 30 page

7.3 Thermal Information (continued)

THERMAL METRIC(1)

TMUX7411F/ TMUX7412F/

TMUX7413F

UNIT

PW (TSSOP)

RRP (WQFN)

16 PINS

RθJC(bot)

Junction-to-case (bottom) thermal resistance

N/A

4.0

°C/W

(1)

For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application

report.

7.4 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

VDD – VSS (1)

Power supply voltage differential

VDD

Positive power supply voltage

Source pin (Sx) voltage (non-fault condition)

VSS

VDD

VS to GND

Source pin (Sx) voltage to GND (fault condition)

–60

VS to VDD (2)

Source pin (Sx) voltage to VDD or VD (fault condition)

–85

VS to VSS (2)

Source pin (Sx) voltage to VSS or VD (fault condition)

Drain pin (Dx) voltage

VSS

VDD

VSEL

Logic control input pin voltage (SELx)

GND

VDD

VDIG_OUT (3)

Digital output pin voltage (FF)

GND

5.5

Ambient temperature

–40

125

°C

IDC TMUX741xF

Continuous current through switch, WQFN package, 25°C

150

IDC TMUX741xF

Continuous current through switch, WQFN package, 125°C

(1)

VDD and VSS can be any value as long as 8 V ≤ (VDD – VSS) ≤ 44 V, and the minimum VDD is met.

(2)

Source pin voltage (Sx) under a fault condition may not exceed 85 V from supply pins (VDD and VSS.) or drain pins (D, Dx).

(3)

Digital output pin (FF) is an open drain output and should be pulled up to a voltage within the max ratings

7.5 Electrical Characteristics (Global)

at TA = 25°C (unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

ANALOG SWITCH

Threshold voltage for fault

detector

0.7

DIGITAL INPUT/ OUTPUT

VIH

High-level input voltage

DR pin

TA = –40°C to +125°C

1.3

VIL

Low-level input voltage

DR pin

TA = –40°C to +125°C

0.8

VOL(FLAG)

Low-level output voltage

FF pin, IO = 5 mA

TA = –40°C to +125°C

0.35

POWER SUPPLY

VUVLO

Undervoltage lockout (UVLO)

threshold voltage (VDD – VSS)

Rising edge, single supply configuration

only

TA = –40°C to +125°C

6.5

Falling edge, single supply configuration

only

TA = –40°C to +125°C

5.8

6.5

TMUX7411F, TMUX7412F, TMUX7413F

SCDS404 – MARCH 2021

www.ti.com

Submit Document Feedback

Product Folder Links: TMUX7411F TMUX7412F TMUX7413F

TMUX7411F Fiches technique(PDF) 6 Page - Texas Instruments

TMUX7411F Fiches technique(HTML) 6 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Fiches technique Télécharger

Lien URL