| Moteur de recherche de fiches techniques de composants électroniques |
|
LPC47M14X Fiches technique(PDF) 75 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
LPC47M14X Fiches technique(HTML) 75 Page - SMSC Corporation |
|
75 / 205 page ![]() SMSC DS – LPC47M14X Page 75 Rev. 03/19/2001 Table 37 – MIDI Receive Buffer Empty Status Bit STATUS PORT DESCRIPTION D7 0 MIDI Read/Command Acknowledge data is available to the host. 1 MIDI Read/Command Acknowledge data is NOT available to the host. Bit 6 – MIDI Transmit Busy Bit 6 MIDI Transmit Busy indicates the send (write) state of the MIDI Data port and Command port (Table 38) There are no interrupts associated with MIDI transmit (write) data. Table 38 – MIDI Transmit Busy Status Bit STATUS PORT DESCRIPTION D6 0 The MPU-401 interface is ready to accept a data/command byte from the host. 1 The MPU-401 interface is NOT ready to accept a data/command byte from the host. Bits[5:0] RESERVED (Reserved bits cannot be written and return ‘0’ when read). Command Port The Command port is used to transfer MPU-401 commands to the Command Controller. The Command port is write- only (Table 39). See Section “MPU-401 Command controller” below. Table 39 – MPU-401 Command Port MPU-401 I/O BASE ADDRESS+1 D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT TYPE W W W W W W W W n/a NAME COMMAND REGISTER Interrupt The MPU-401 IRQ is asserted (‘1’) when either MIDI receive data or a command acknowledge byte is available tot he host in the MIDI data register (FIGURE 4). the IRQ is deasserted (‘0’) when the host reads the MIDI Data port. Note: If, following a host read, data is still available in the 16C550A Receive FIFO, the IRQ will remain asserted (‘1’). The IRQ is enabled when the ‘Activate’ bit in the MPU-401 configuration registers logical device block is asserted ‘1’. If the Activate bit is deasserted ‘0’, the MPU-401 IRQ cannot be asserted (see Section “MPU-401 Configuration Registers”). The MPU-401 IRQ is not affected by MIDI write data, 16C550A transmit-related functions or Receiver Line Status interrupts. The factory default Sound Blaster 16 MPU-401 IRQ is 5. |
|
Lien URL |
| ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Lien vers la fiche technique | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |