V3021 datasheet(4/15 Pages) EMMICRO

4 / 15 page

V3021

www.emmicroelectronic.com

The V3021 will run slightly too fast, in order to allow the

user to adjust the frequency, depending on the mean

operating temperature. This is made since the crystal

adjustment can only work by lowering the frequency with

an added capacitor between XO and VSS. The printed

circuit

capacitance

has

also

taken

into

consideration. The V3021 in DIL 8 package, running with

an 8.2 pF crystal at room temperature, will be adjusted to

better

than

±1s/day

with

6.8

capacitor.

Typical Frequency on I/O Pin

Typical drift for ideal 32'768 Hz quartz

Note

: The trimming capacitor value must not exceed

15 pF. Greater values may disturb the oscillator

function

Fig. 3

Quartz Characteristics

∆

= -0.038

ppm

(T – TO)

2 ± 10%

∆F/FO

the ratio of the change in frequency to the

nominal value expressed in ppm (it can be

thought of as the frequency deviation at any

temperature)

the temperature of interest in °C

the turnover temperature (25 ± 5°C)

To determine the clock error (accuracy) at a given

temperature, add the frequency tolerance at 25°C to the

value obtained from the formula above.

Fig. 4

V3021 Fiches technique(PDF) 4 Page - EM Microelectronic - MARIN SA

V3021 Fiches technique(HTML) 4 Page - EM Microelectronic - MARIN SA

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Fiches technique Télécharger

Lien URL