STE12PS datasheet(16/44 Pages) STMICROELECTRONICS

16 / 44 page

Obsolete

Product(s)

- Obsolete

Product(s)

Functional description

STE12PS

16/44

Monitor overload FSM

This FSM manages all operations related to monitoring an overload event.

All operations described below are related to channels currently powered.

●

STARTUP: the following operations are related to a startup procedure:

–

START: channel to be monitored is selected.

●

POWER MEASUREMENT: the following operations are related to a power

measurement procedure

–

SAMPLE Imeas: the current measurement is sampled and the next powered

channel is prepared for the next monitor procedure.

–

MEASURE Power: the power is measured and its value is compared against the

required Power class.

–

START MONITOR OVERLOAD: if the measured power exceeds the required

power class the Tovld timer and the averaging process are started.

–

COUNTER RESET: Tovld timer is reset if the measured power doesn’t exceed the

required

●

POWER REMOVAL: the following operations are related to a power removal

procedure:

–

COUNTER CHECK: all Tovld timers are checked, and those that have expired are

identified.

–

POWER REMOVAL: all the channels whose timers have expired and whose

average power exceeds the maximum are switched OFF through the

POWER_EN(n) pins.

–

ALARM SET: for all the channels whose timers have expired, a corresponding

alarm flag is raised in the Channel Event registers, and the related Ted timer is

started.

STE12PS Fiches technique(PDF) 16 Page - STMicroelectronics

STE12PS Fiches technique(HTML) 16 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Fiches technique Télécharger

Lien URL