T4-LDS-0245, Rev. 2 (5/31/13)

©2013 Microsemi Corporation

Page 1 of 6

1N4614UR-1 – 1N4627UR-1e3,

1N4099UR-1 – 1N4135UR-1e3

Available on

commercial

versions

500 mW Metallurgically Bonded

Glass Surface Mount Zener Diodes

Qualified per MIL-PRF-19500/435

Qualified Levels:

JAN, JANTX,

JANTXV and JANS

DESCRIPTION

The 1N4099UR-1 through 1N4135UR-1 and 1N4614UR-1 through 1N4627UR-1 series are

500 mW, Zener voltage regulators in the surface mount, glass DO-213AA package. Voltages

from 1.8 to 100V in 5%, 2%, and 1% tolerances are available. They are constructed with an

internal metallurgical bond and are mil-qualified up to the JANS level for high reliability

applications.

DO-213AA

Package

Also available in:

DO-35 package

(axial-leaded)

1N4099-1 – 1N4135-1 and

1N4614-1 – 1N4627-1

DO-216 package

(tabbed surface mount)

1PMT4099 – 1PMT4135 and

1PMT4614 – 1PMT4627

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

•

Surface mount equivalent to JEDEC registered 1N4099 through 1N4135 and 1N4614 through

1N4627 series.

•

Internal metallurgical bond.

•

Max noise density 40

μV / √Hz for 6.8 V and up. Falls quickly to 1 μV / √Hz at lower voltages.

•

JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435.

•

This series is also available commercially with the CDLL prefix (CDLL4099-1 – CDLL4135-1 and

CDLL4614-1 – CDLL4627-1). This CDLL prefix also replaces the MLL prefix on prior devices.

•

RoHS compliant versions available (commercial grade only).

APPLICATIONS / BENEFITS

•

Regulates voltage over broad ranges of current and temperature.

•

Extensive selection from 1.8 to 100 volts.

•

Voltage tolerances of 5% (standard), 2% and 1% are available.

•

Hermetically sealed surface mount package.

•

Non-sensitive to ESD per MIL-STD-750 method 1020.

•

Minimal capacitance (see Figure 3).

•

Inherently radiation hard as described in Microsemi MicroNote 050.

MAXIMUM RATINGS @ TC = +25 ºC unless otherwise specified

MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841

Tel: 1-800-446-1158 or

(978) 620-2600

Fax: (978) 689-0803

MSC – Ireland

Gort Road Business Park,

Ennis, Co. Clare, Ireland

Tel: +353 (0) 65 6840044

Fax: +353 (0) 65 6822298

Website:

www.microsemi.com

Parameters/Test Conditions

Symbol

Value

Unit

Junction and Storage Temperature

TJ and TSTG

-65 to +175

oC

Thermal Resistance Junction-to-Ambient

(1)

RӨJA

300

oC/W

Thermal Resistance Junction-to-End Cap

RӨJEC

100

oC/W

Rated Average Power Dissipation

(2)

PM(AV)

0.5

W

Forward Voltage @ 200 mA

VF

1.1

V

Solder Temperature @ 10 s

260

oC

Notes: 1. When mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page).

2. The 0.5 W linearly derates starting at TEC = 125 °C and goes to zero at 175 °C. For ambient TA

condition on a typical PC board, it linearly derates from 500 mW starting at 25 °C and goes to zero at

175 °C (see Figure 2).