Features
▪ Single voltage operation with range of 2.7V to 3.6V
▪ 128-Mbit (32 x 4 Mbit physical block) Flash Memory
▪ Default Operating Mode is SPI Quad I/O
▪ Serial Peripheral Interface (SPI) compatible support
• Supports SPI modes 0 and 3
• Supports Dual Output and Quad Output read
• Supports Dual I/O and Quad I/O read
▪ Maximum Operating Frequency
• 133 MHz maximum operating frequency at 85 oC
• 120 MHz maximum operating frequency at 105 oC
▪ Read Operations
• 70 MHz SPI normal read
• 120 MHz SPI fast read
• 133 MHz Quad Output fast read at 85 oC
• Dual I/O data transfer rate up to 240 Mbps
• Quad I/O data transfer rate up to 480 Mbps
• Quad Output data transfer rate up to 532 Mbps
• Continuous read with 8/16/32/64-byte wrap
▪ Flexible programming
• Byte/Page program (1 to 256 Bytes)
• Program suspend and resume
▪ Fast program and erase times
• 0.6 ms typical page (256 byte) program time
• 70 ms typical 4-Kbyte block erase time
• 150 ms typical 32-Kbyte block erase time
• 250 ms typical 64-Kbyte block erase time
• Full chip erase: 30 s typical
▪ Hardware and software Write Protection
• Hardware-controlled locking of protected sector via WP pin
• Three 256-byte OTP-capable security registers
• Write protect all or part of memory via software with top/bottom block selection
▪ Serial Flash Discoverable Parameter (SFDP) register
▪ Low power dissipation
• 13 µA standby current at 85 oC
• 20 µA standby current at 105 oC
• 2 µA deep power-down current at 85 oC
• 5 µA deep power-down current at 105 oC
▪ Endurance:
• 100K program/erase cycles at 85 oC
• 10K program/erase cycles at 105 oC
▪ Data Retention:
• 20 years at 85 oC
• 10 years at 105 oC
▪ Temperature Range:
• Industrial: -40 oC to 85 oC
• Extended Temperature Range: -40 oC to 105 oC
▪ Industry standard green (Pb/Halide-free/RoHS compliant) package options
• 8-lead 0.208” Wide SOIC
• 8-pad (5 x 6 x 0.6 mm) UDFN