Features
▪ Serial Peripheral Interface (SPI) Compatible
• Supports SPI modes 0 and 3 (1,1,1)
• Supports dual input and dual output operation (1,1,2)
• Supports quad input and quad output operation (1,1,4)
• Supports quad XiP (continuous read mode) operation (1,4,4 and 0,4,4)
▪ Default Operating Mode is SPI Quad I/O
▪ 64-Mbit (16 x 4 Mbit) Flash Memory
▪ 104 MHz Maximum Operating Frequency
▪ Single 2.7 V - 3.6 V Single Supply Voltage
▪ Serial Flash Discoverable Parameters (SFDP, JDES216B) support
▪ OTP Memory
• Three Protected Programmable Security Register Pages (Page size: 256 bytes)
• 64-bit factory programmable UID register
▪ Hardware Write Protection (WP pin)
▪ Software Write protection (Programmable non-volatile control registers)
▪ Program and Erase Suspend and Resume
▪ Byte programming size: up to 256 bytes
▪ Erase Size and Duration
• Uniform 4-kbyte Block Erase (65 ms typical)
• Uniform 32-kbyte Block Erase (150 ms typical)
• Uniform 64-kbyte Block Erase (240 ms typical)
• Full Chip Erase (30 seconds typical)
▪ Low-Power Dissipation
• Standby Current (14 µA typical)
• Deep Power-Down Current (1 µA typical)
▪ Endurance: 100,000 Program and Erase Cycles
▪ Data Retention: 20 Years
▪ Industrial Temperature Range (-40 oC to 85 oC)
▪ Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
• 8-lead W-SOIC (0.208”)
• 8-pad Ultra-Thin DFN (5 x 6 x 0.6 mm)
• Die Wafer Form
• Other Package Options (contact Renesas Electronics)