2

Power handling values are calculated based on Cable properties. Power handling will vary based on the actual VSWR

of the cable assembly.

Insertion Loss does not include the loss of the connectors. Insertion Loss is estimated as .05dB x SQRT (Frequency

GHz) per connector.

Mechanical Specifications

Cable Assembly

Diameter

0.822 in [20.88 mm]

.

Weight

0.12 lbs [54.43 g]

Cable

Cable Type

PE-P142LL

Impedance

50 Ohms

Inner Conductor Type

Solid

Inner Conductor Material and Plating

Copper, Silver

Dielectric Type

PTFE

Number of Shields

3

Shield Layer 1

Silver Plated Copper Tape

Shield Layer 2

Aluminum Polyester

Shield Layer 3

Silver Plated Copper Wire

Jacket Material

FEP

Jacket Diameter

0.195 in [4.95 mm]

.

Repeated Minimum Bend Radius

1 in [25.4 mm]

Connectors

Description

Connector 1

Connector 2

Type

N Male

N Male

Impedance

50 Ohms

50 Ohms

Contact Material and Plating

Beryllium Copper, Gold

Beryllium Copper, Gold

Contact Plating Specification

ASTM-B488, 50µ Inch.

ASTM-B488, 50µ Inch.

Dielectric Type

PTFE

PTFE

Outer Conductor Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

Outer Conductor Plating Specification

SAE-AMS-2700

SAE-AMS-2700

Coupling Nut Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

Coupling Nut Plating Specification

SAE-AMS-2700

SAE-AMS-2700

Hex Size

3/4 Inch

3/4 Inch

Torque

14 in-lbs [1.58 Nm]

14 in-lbs [1.58 Nm]

Body Material and Plating

Passivated Stainless Steel

Passivated Stainless Steel

.

PE343 REV 1.2

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: N Male to N Male Cable Using PE-P142LL Coax PE343

RF Cable Assemblies Technical Data Sheet

PE343

N Male to N Male Cable Using PE-P142LL Coax