TS2012EI datasheet(3/32 Pages) STMICROELECTRONICS

3 / 32 page

DocID026152 Rev 1

3/32

TS2012EI

Absolute maximum ratings and operating conditions

Table 2. Absolute maximum ratings

Symbol

Parameter

Value

Unit

VCC

Supply voltage (1)

All voltage values are measured with respect to the ground pin.

Vin

Input voltage (2)

The magnitude of the input signal must never exceed VCC + 0.3 V / GND - 0.3 V.

GND to VCC

Toper

Operating free air temperature range

-40 to + 85

°C

Tstg

Storage temperature

-65 to +150

°C

Maximum junction temperature

150

°C

Rthja

Thermal resistance junction to ambient (3)

The device is protected in case of over temperature by a thermal shutdown active at 150°C.

200

°C/W

Power dissipation

Internally limited (4)

Exceeding the power derating curves during a long period will cause abnormal operation.

ESD

HBM: human body model(5)

Human body model: 100 pF discharged through a 1.5 k

resistor between two pins of the device, done for

all couples of pin combinations with other pins floating.

2kV

MM: machine model(6)

Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two

pins of the device with no external series resistor (internal resistor < 5

), done for all couples of pin

combinations with other pins floating.

200

Latch-up

Latch-up immunity

200

VSTBY

Standby pin maximum voltage

GND to VCC

Lead temperature (soldering, 10sec)

260

°C

Output short-circuit protection(7)

Implemented short-circuit protection protects the amplifier against damage by short-circuit between

positive and negative outputs of each channel and between outputs and ground.

TS2012EI Fiches technique(PDF) 3 Page - STMicroelectronics

TS2012EI Fiches technique(HTML) 3 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Fiches technique Télécharger

Lien URL