Moteur de recherche de fiches techniques de composants électroniques
  French  ▼
ALLDATASHEET.FR

X  

KLI-4104-RAA-CB-AE Fiches technique(PDF) 3 Page - ON Semiconductor

No de pièce KLI-4104-RAA-CB-AE
Description  Linear CCD Image Sensor
PDF  28 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricant  ONSEMI [ON Semiconductor]
Site Internet  http://www.onsemi.com
Logo ONSEMI - ON Semiconductor

KLI-4104-RAA-CB-AE Fiches technique(HTML) 3 Page - ON Semiconductor

  KLI-4104-RAA-CB-AE Datasheet HTML 1Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 2Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 3Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 4Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 5Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 6Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 7Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 8Page - ON Semiconductor KLI-4104-RAA-CB-AE Datasheet HTML 9Page - ON Semiconductor Next Button
Zoom Inzoom in Zoom Outzoom out
 3 / 28 page
background image
KLI−4104
www.onsemi.com
3
DEVICE DESCRIPTION
Architecture
Figure 2. Block Diagram
VIDB
VIDR
VIDG
24 Dark
4080 Active Color Pixels
24 Test
24 Dark
(ea.)
24 Dark
(ea.)
4 Blank
(ea.)
2040 Higher order pixels − odd
4 Blank
(ea.)
4 Blank
Pin 1 Corner
Chroma Pixel 1
Luma Pixel 1 Centered on Chroma Pixel 1 Leading Edge
VIDLAO
VIDLAE
VIDLBE
VIDLBO
2040 Lower order pixels − odd
2040 Higher order pixels − even
2040 Lower oder pixels − even
48 Dark
Pixels
48 Dark
Pixels
Pixels
8160 Active Luminance
The KLI−4104 Image Sensor is a high resolution,
quadri-linear array designed for high-speed color scanning
applications. Each device contains 3 rows of 4,080 active
photoelements, consisting of high performance ‘pinned
diodes’ for improved sensitivity, lower noise and the
elimination of lag. Each row is selectively covered with
a red, green or blue integral filter stripe for unparalleled
spectral separation. The pixel height and pitch is 10 micron
and the center-to-center spacing between color channels is
90 microns, giving an effective nine line delay between
adjacent channels during imaging.
Each device also contains 1 row of 8,160 active
photoelements. This channel has a monochrome response.
The pixel height and pitch is 5 micron and the
center-to-center spacing between this luminance channel
and the blue color channel is 122.5 microns, giving an
effective 12 1/4 line delay.
Readout of the pixel data for each color channel is
accomplished through the use of a single CCD shift register
allowing for a single output per channel with no
multiplexing
artifacts.
Twenty-four
light
shielded
photoelements are supplied at the start of each channel to act
as a dark reference. After the 4,080 active pixels, the trailing
region contains 24 pixels dedicated for test. Only the first
16 pixels in this trailing group are configured to be dark
reference pixels. The remaining pixels are used for internal
testing. See the block diagram in Figure 2.
Readout of the pixel data for the luminance channel is
accomplished through the use of four CCD shift registers in
an
odd/even
and
left/right
readout
configuration.
Forty-eight light shielded photoelements are supplied at the
beginning of each output channel to act as its dark reference.
In other words, twenty-four dark reference pixels are on the
leading edge of each luma output, none trailing. See the
block diagram in Figure 2.
The devices are manufactured using NMOS, buried
channel processing and utilize dual layer polysilicon and
dual layer metal technologies.
The architecture of the KLI−4104 provides the ability to
achieve high-resolution color scans (600 dpi) by utilizing
information from all 4 channels. The edge data from the
luminance channel (which provides the image “detail”) can
be combined with the chroma data and the result is a full
resolution color image. In this design there are 4 outputs on
the luminance channel to match the read out rate of the
chroma channels. Both resolution and throughput are
thereby maximized.
The die size is 50.50
× 1.10 mm and is housed in a custom
46-pin, 0.400
″ wide, dual in line package. The die center is
located between the blue and red channels and the color
channels are centered in the long direction of the die.
The blue channel center line is displaced +30
mm along the
short dimension of the die from the die center, with pin 1 in
the lower left corner.
Why High-Resolution Luma/Low-Resolution
Chrominance?
The human visual system uses more luminance
information than chrominance information. Based on this,
we know that high spatial frequency luminance data
represents the “details” in an image. To achieve a full
resolution (8,160 pixels) color scan, the chrominance data
can be of lower resolution (4,080 pixels) as long as the
“edge/detail” information is sampled at the higher
frequency.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28


Fiches technique Télécharger

Go To PDF Page


Lien URL



ALLDATASHEET vous a-t-il été utile ?  [ DONATE ] 

À propos de Alldatasheet   |   Publicité   |   Contactez-nous   |   Politique de confidentialité   |   Lien vers la fiche technique    |   Echange de liens   |   Fabricants
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com