PROGRAMMABLE DIGITAL DELAY TIMER

DESCRIPTION:

The LS7211 and LS7212 are CMOS integrated circuits for

generating digitally programmable delays. The

delay is

controlled by 8 binary weighted inputs, WB0 - WB7, in con-

junction with an applied clock or oscillator frequency. The

programmed time delay manifests itself in the Delay Output

(OUT) as a function of the Operating Mode selected by the

Mode Select inputs A and B: One-Shot, Delayed Operate,

Delayed Release or Dual Delay. The time delay is initiated

by a transition of the Trigger Input (TRIG).

I/O DESCRIPTION:

MODE SELECT Inputs A & B (Pins 1 & 2)

The 4 operating modes are selected by Inputs A and B

according to Table 1

TABLE 1. MODE SELECTION

A

B

MODE

0

0

One-Shot (OS)

0

1

Delayed Operate (DO)

1

0

Delayed Release (DR)

1

1

Dual Delay (DD)

Each input has an internal pull-up resistor of about 500k

Ω.

One-Shot Mode (OS)

A positive transition at the TRIG input causes OUT to

switch low without delay and starts the delay timer. At the

end of the programmed delay timeout, OUT switches high.

If a delay timeout is in progress when a positive transition

occurs at the TRIG input, the delay timer will be restarted.

A negative transition at the TRIG input has no effect.

Delayed Operate Mode (DO)

A positive transition at the TRIG input starts the delay tim-

er. At the end of the delay timeout, OUT switches low. A

negative transition at the TRIG input causes OUT to switch

high without delay. OUT is high when TRIG is low.

Delayed Release Mode (DR)

A negative transition at the TRIG input starts the delay tim-

er. At the end of the delay timeout, OUT switches high. A

postive transition at the TRIG input causes OUT to switch

low without delay. OUT is low when TRIG is high.

Dual Delay Mode (DD)

A positive or negative transition at the TRIG input starts

the delay timer. At the end of the delay timeout, OUT

switches to the logic state which is the inverse of the TRIG

input. If a delay timeout is in progress when a transition

occurs at the TRIG input, the delay timer is restarted.

7211-110503-1

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

OUT

A

B

TRIG

RC/CLOCK

RCS/CLKS

PSCLS

RESET

WB0

WB1

WB2

WB3

WB4

WB5

WB6

WB7

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

OUT

A

B

TRIG

XTLI/CLOCK

XTLO

PSCLS

RESET

WB0

WB1

WB2

WB3

WB4

WB5

WB6

WB7

FIGURE 1

PIN ASSIGNMENT - TOP VIEW

November 2003

LSI/CSI

LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747 (631) 271-0400 FAX (631) 271-0405

LS7211-7212

FEATURES:

• 8-bit programmable delay from microseconds to days

• On chip oscillator (RC or Crystal) or external clock time base

• Selectable prescaler for real time delay generation based

on 50Hz/60Hz time base or 32.768kHz watch crystal

• Four operating modes

• Reset input for delay abort

• Low quiescent and operating current

• Direct relay drive

• LS7211, LS7212 (DIP); LS7211-S, LS7212-S (SOIC) - See Figure 1

UL

®

A3800