UM1518 datasheet(20/37 Pages) STMICROELECTRONICS

20 / 37 page

Services

UM1518

20/37

Doc ID 022791 Rev 2

The ST7580 GUI automatically handles the MIB subfields in accordance with MIB object

composition. Figure 16 shows the position of MIB objects inside the GUI tabs:

Figure 16.

Position of MIB objects

The buttons present on the GUI perform the allowed operations (writing, reading, erasing)

on each corresponding object.

5.4

Other ST7580 commands

5.4.1

Ping commands

Through a dedicated button located in the COM Settings tab, it is possible to send to the

ST7580 a PingRequest command with editable data Payload.

After the execution of the PingRequest command, a PingConfirm command is expected: the

success of the previous request and data received are displayed through a dedicated LED

and box.

Figure 17 shows all the graphical objects dedicated to the PingRequest and PingConfirm

commands:

0Ah Firmware Version

09h Host Interface Timeout

00h Modem Configuration

01h PHY Configuration

02h SS Key

04h Last Data Indication

05h Last TX Confirm

06h PHY Data

07h DL Data

08h SS Data

AM11961v1

UM1518 Fiches technique(PDF) 20 Page - STMicroelectronics