USB2503 datasheet(22/43 Pages) SMSC

22 / 43 page

Integrated USB 2.0 Compatible 3-Port Hub

Datasheet

Revision 2.3 (08-27-07)

SMSC USB2503/USB2503A

DATASHEET

5.2.3.9

EEPROM Offset B(h) - Max Power For Self Powered Operation

5.2.3.10

EEPROM Offset C(h) - Max Power For Bus Powered Operation

5.2.3.11

EEPROM Offset D(h) - Hub Controller Max Current For Self Powered Operation

BIT

NUMBER

BIT NAME

DESCRIPTION

7:0

MAX_PWR_SP

Max Power Self_Powered: Value in 2mA increments that the Hub consumes

from an upstream port (VBUS) when operating as a self-powered hub. This

value includes the hub silicon along with the combined power consumption

(from VBUS) of all associated circuitry on the board. This value also includes

the power consumption of a permanently attached peripheral if the hub is

configured as a compound device, and the embedded peripheral reports

0mA in its descriptors.

Note: The USB 2.0 Specification does not permit this value to exceed

100mA

A value of 50 (decimal) indicates 100mA.

BIT

NUMBER

BIT NAME

DESCRIPTION

7:0

MAX_PWR_BP

Max Power Bus_Powered: Value in 2mA increments that the Hub consumes

from an upstream port (VBUS) when operating as a bus-powered hub. This

value includes the hub silicon along with the combined power consumption

(from VBUS) of all associated circuitry on the board. This value also includes

the power consumption of a permanently attached peripheral if the hub is

configured as a compound device, and the embedded peripheral reports

0mA in its descriptors.

A value of 50 (decimal) indicates 100mA.

BIT

NUMBER

BIT NAME

DESCRIPTION

7:0

HC_MAX_C_SP

Hub Controller Max Current Self-Powered: Value in 2mA increments that the

Hub consumes from an upstream port (VBUS) when operating as a self-

powered hub. This value includes the hub silicon along with the combined

power consumption (from VBUS) of all associated circuitry on the board.

This value does NOT include the power consumption of a permanently

attached peripheral if the hub is configured as a compound device.

Note: The USB 2.0 Specification does not permit this value to exceed

100mA

A value of 50 (decimal) indicates 100mA, which is the default value.

USB2503 Fiches technique(PDF) 22 Page - SMSC Corporation

USB2503 Fiches technique(HTML) 22 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Fiches technique Télécharger

Lien URL