MPC8347VRAGDB datasheet(67/99 Pages) FREESCALE

67 / 99 page

MPC8347EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 12

Freescale Semiconductor

Package and Pin Listings

Table 56 provides the pinout listing for the MPC8347EA, 620 PBGA package.

No Connection

W32, AA31, AA32, AA33, AA34,

AB31, AB32, AB33, AB34, AC29,

AC31, AC33, AC34, AD30, AD32,

AD33, AD34, AE29, AE30, AH32,

AH33, AH34, AM33, AJ31, AJ32,

AJ33, AJ34, AK32, AK33, AK34,

AM34, AL33, AL34, AK31, AH30,

AC32, AE32, AH31, AL32, AG34,

AE33, AF32, AE34, AF34, AF33,

AG33, AG32, AL11, AM11, AP10, Y32,

Y34, Y31, Y33

——

—

Notes:

1. This pin is an open-drain signal. A weak pull-up resistor (1 k

Ω) should be placed on this pin to OV

DD.

2. This pin is an open-drain signal. A weak pull-up resistor (2–10 k

Ω) should be placed on this pin to OV

DD.

3. During reset, this output is actively driven rather than three-stated.

4. These JTAG pins have weak internal pull-up P-FETs that are always enabled.

5. This pin should have a weak pull-up if the chip is in PCI host mode. Follow the PCI specifications.

6. This pin must always be tied to GND.

7. This pin must always be pulled up to OVDD.

8. This pin must always be left not connected.

9. Thermal sensitive resistor.

10.It is recommended that MDIC0 be tied to GRD using an 18

Ω resistor and MDIC1 be tied to DDR power using an 18 Ω

resistor.

11.TSEC1_TXD[3] is required an external pull-up resistor. For proper functionality of the device, this pin must be pulled up or

actively driven high during a hard reset. No external pull-down resistors are allowed to be attached to this net.

12. A weak pull-up resistor (2–10 k

Ω) should be placed on this pin to LV

DD1.

13. For systems that boot from local bus (GPCM)-controlled NOR flash, a pullup on LGPL4 is required.

Table 56. MPC8347EA (PBGA) Pinout Listing

Signal

Package Pin Number

Pin Type

Power

Supply

Notes

PCI

PCI1_INTA/IRQ_OUT

D20

OVDD

PCI1_RESET_OUT

B21

OVDD

—

PCI1_AD[31:0]

E19, D17, A16, A18, B17, B16, D16,

B18, E17, E16, A15, C16, D15, D14,

C14, A12, D12, B11, C11, E12, A10,

C10, A9, E11, E10, B9, B8, D9, A8,

C9, D8, C8

I/O

OVDD

—

PCI1_C/BE[3:0]

A17, A14, A11, B10

I/O

OVDD

—

PCI1_PAR

D13

I/O

OVDD

—

PCI1_FRAME

B14

I/O

OVDD

Table 55. MPC8347EA (TBGA) Pinout Listing (continued)

Signal

Package Pin Number

Pin Type

Power

Supply

Notes

MPC8347VRAGDB Fiches technique(PDF) 67 Page - Freescale Semiconductor, Inc

MPC8347VRAGDB Fiches technique(HTML) 67 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

Fiches technique Télécharger

Lien URL