MP3302 datasheet(2/12 Pages) MPS

2 / 12 page

MP3302 –40V, 1.3A, SINGLE-CELL STEP-UP WHITE LED DRIVER WITH SINGLE WIRE DIMMING CONTROL

MP3302 Rev. 0.98

www.MonolithicPower.com

5/5/2010

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

Free Air Temperature (TA)

MP3302DJ*

TSOT23-5

–40

°C to +85°C

MP3302DD**

QFN8 (2mm x 3mm)

–40

°C to +85°C

* For Tape & Reel, add suffix –Z (e.g. MP3302DJ–Z);

For RoHS Compliant Packaging, add suffix –LF (e.g. MP3302DJ–LF–Z).

** For Tape & Reel, add suffix –Z (e.g. MP3302DD–Z);

For RoHS Compliant Packaging, add suffix –LF (e.g. MP3302DD–LF–Z)

PACKAGE REFERENCE

TOP VIEW

GND

Exposed Pad

Connect to GND

TSOT23-5

QFN8 (2mm x 3mm)

ABSOLUTE MAXIMUM RATINGS (1)

SW Pin.........................................–0.5V to +44V

All Other Pins..............................–0.3V to +6.5V

Continuous Power Dissipation…(TA = +25°C)

(2)

TSOT23-5 ................................................ 0.57W

QFN8 (2mm x 3mm) ................................ 1.56W

Storage Temperature.............. –55

°C to +150°C

Recommended Operating Conditions

(3)

IN Supply Voltage ..............................2.5V to 6V

SW Pin................................................VIN to 36V

Operating Junction Temp. (TJ)..... –40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

TSOT23-5.............................. 220 .... 110..

°C/W

QFN8 (2mm x 3mm)............... 80 ...... 16...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on approximately 1” square of 1 oz copper.

GND

TOP VIEW

MP3302 Fiches technique(PDF) 2 Page - Monolithic Power Systems

MP3302 Fiches technique(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Fiches technique Télécharger

Lien URL