MP2209 datasheet(2/12 Pages) MPS

2 / 12 page

MP2209 – 16V, 2A, 600KHz SYNCHRONOUS STEP-DOWN CONVERTER

MP2209 Rev. 1.01

www.MonolithicPower.com

7/11/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

Free Air Temperature (TA)

MP2209DL

QFN14

(3mm x 4mm)

2209

–40

°C to +85°C

* For Tape & Reel, add suffix –Z (eg. MP2209DL–Z).

For RoHS compliant packaging, add suffix –LF (eg. MP2209DL–LF–Z)

PACKAGE REFERENCE

ABSOLUTE MAXIMUM RATINGS (1)

IN to GND .....................................-0.3V to +18V

SW to GND ........................... -0.3V to VIN + 0.3V

.............................-2.5V to VIN + 2.5V for < 50ns

FB, EN/SYNC, VCC to GND...........-0.3V to +6.5V

BS to SW .....................................-0.3V to +6.5V

Continuous Power Dissipation (TA = +25°C)

(2)

………………………………………………....2.6W

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Storage Temperature............... -65°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ..............................3V to 16V

Bias Voltage VCC ...................................3V to 6V

Output Voltage VOUT..................0.8V to 0.9 x VIN

Operating Junct. Temp (TJ)...... -40°C to +125°C

EN/SYNC Voltage.................. No more than VCC

Thermal Resistance

(4)

θJA

θJC

QFN14 (3mm x 4mm) .............48 ...... 11 ...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-

TA)/θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP2209 Fiches technique(PDF) 2 Page - Monolithic Power Systems

MP2209 Fiches technique(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Fiches technique Télécharger

Lien URL