MCP7940N-ESLASHST datasheet(17/42 Pages) MICROCHIP

No de pièce	MCP7940N-E/ST

Description	Low-Cost I2C Real-Time Clock/Calendar with SRAM and Battery Switchover

PDF	42 Pages

Scroll/Zoom	100%

Fabricant	MICROCHIP [Microchip Technology]

Site Internet	http://www.microchip.com

Logo

17 / 42 page

 2011-2013 Microchip Technology Inc.

DS25010E-page 17

MCP7940N

5.2.5

POWER-FAIL TIME-STAMP

The MCP7941X family of RTCC devices feature a

power-fail time-stamp feature. This feature will store

the time at which VCC crosses the VTRIP voltage and is

shown in Figure 5-4. To use this feature, a VBAT

supply must be present and the oscillator must also be

running.

There are two separate sets of registers that are used

to record this information:

• The first set, located at 0x18h through 0x1Bh, is

loaded at the time when VCC falls below VTRIP

and the RTCC operates on the VBAT. The VBAT

(register 0x03h bit 4) bit is also set at this time.

• The second set of registers, located at 0x1Ch

through 0x1Fh, is loaded at the time when VCC is

restored and the RTCC switches to VCC.

The power-fail time-stamp registers are cleared when

the VBAT bit is cleared in software.

FIGURE 5-4:

POWER-FAIL GRAPH

VCC

VTRIP(max)

VTRIP(min)

Power-Down

Power-Up

Time-Stamp

MCP7940N-E/ST Fiches technique(PDF) 17 Page - Microchip Technology