LSM303DLHC datasheet(36/42 Pages) STMICROELECTRONICS

36 / 42 page

LSM303DLHC

36/42

Doc ID 018771 Rev 1

1 LSB = 1/ODR. TLA7 through TLA0 define the time interval that starts after the first click

detection where the click detection procedure is disabled, in cases where the device is

configured for double click detection.

7.1.27

TIME WINDOW_A (3Dh)

1 LSB = 1/ODR. TW7 through TW0 define the maximum interval of time that can elapse

after the end of the latency interval in which the click detection procedure can start, in cases

where the device is configured for double click detection.

7.2

Magnetic field sensing register description

7.2.1

CRA_REG_M (00h)

Table 68.

TIME_WINDOW_A register

TW7

TW6

TW5

TW4

TW3

TW2

TW1

TW0

Table 69.

TIME_WINDOW_A description

TW7-TW0

CLICK-CLICK time window

Table 70.

CRA_REG_M register

TEMP_EN

0(1)

This bit must be set to ‘0’ for correct working of the device

0(1)

DO2

DO1

DO0

0(1)

Table 71.

CRA_REG_M description

TEMP _EN

Temperature sensor enable.

0: temperature sensor disabled (default), 1: temperature sensor enabled

DO2 to DO0

Data output rate bits. These bits set the rate at which data is written to all three data

output registers (refer to

Table 72). Default value: 100

Table 72.

Data rate configurations

DO2

DO1

DO0

Minimum data output rate (Hz)

0.75

1.5

3.0

7.5

LSM303DLHC Fiches technique(PDF) 36 Page - STMicroelectronics

LSM303DLHC Fiches technique(HTML) 36 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Fiches technique Télécharger

Lien URL