DAC0832LCWMXSLASHNOPB datasheet(21/29 Pages) TI

21 / 29 page

DAC0830, DAC0832

www.ti.com

SNAS534B – MAY 1999 – REVISED MARCH 2013

Figure 34. Two Terminal Floating 4 to 20 mA Current Loop Controller

•

DAC0830 linearly controls the current flow from the input terminal to the output terminal to be 4 mA (for D=0)

to 19.94 mA (for D=255).

•

Circuit operates with a terminal voltage differential of 16V to 55V.

•

P2 adjusts the magnitude of the output current and P1 adjusts the zero to full scale range of output current.

•

Digital inputs can be supplied from a processor using opto isolators on each input or the DAC latches can

flow-through (connect control lines to pins 3 and 10 of the DAC) and the input data can be set by SPST

toggle switches to ground (pins 3 and 10).

Figure 35. DAC Controlled Exponential Time Response

•

Output responds exponentially to input changes and automatically stops when VOUT=VIN

•

Output time constant is directly proportional to the DAC input code and capacitor C

•

Input voltage must be positive (See Using the DAC0830 in a Voltage Switching Configuration

Submit Documentation Feedback

Product Folder Links: DAC0830 DAC0832

DAC0832LCWMX/NOPB Fiches technique(PDF) 21 Page - Texas Instruments