Commercial

Model

Medical

Model

Output

Current

Minimum

Load

Load

Regulation

Initial Setpoint

Tolerance

OVP

Setpoint

Ripple and

Noise

GPC41-5

GPM41-5

5.1 V

6.0 A

0.15

0.75%

2%

6.2 ± 0.6 V

1%

GPC41-12

GPM41-12

12 V

3.3 A

0.03

0.75%

2%

14 ± 1.0 V

1%

GPC41-15

GPM41-15

15 V

2.7 A

0.03

0.75%

2%

19 ± 1.5 V

1%

GPC41-24

GPM41-24

24 V

1.7 A

0.01

0.75%

2%

28± 2.5 V

1%

GPC41-28

28 V

1.4 A

0.01

0.75%

2%

34 ± 2.8 V

1%

SL Power Electronics Corp., 6050 King Drive, Bldg.A, Ventura, CA, 93003, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 Email: info@slpower.com. Rev. 4/08.

Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication.

However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.

3

3

ENVIRONMENTAL SPECIFICATIONS

OPERATING

NON-OPERATING

Temperature (A)

See individual specs.

-40 to +85°C

Humidity (A)

0 to 95% RH

0 to 95% RH

Shock (B)

20 g

pk

40 g

pk

Altitude

-500 to 10,000 ft

-500 to 40,000 ft

Vibration (C)

1.5 g

2

/Hz

5 g

2

/Hz

A. Units should be allowed to warm up/operate under non-condensing conditions before application of power. Derate output

current and total output power by 2.5% per °C above 50°C. For operation in a confined space, moving air may be required. Under

all conditions, the cooling vs. load profile should be such that heat sinks and/or heatsink temperatures do not exceed 90 °C for

extended periods.

B. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3 orthogonal axes, total 6 shocks.

C. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to 2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating

and 1 hr./axis non-operating.

GPC41/GPM41 MECHANICAL SPECIFICATIONS