DS41401A datasheet(13/42 Pages) MICROCHIP

No de pièce	DS41401A

Description	F1 Evaluation Platform for Enhanced PIC짰 Microcontrollers

PDF	42 Pages

Scroll/Zoom	100%

Fabricant	MICROCHIP [Microchip Technology]

Site Internet	http://www.microchip.com

Logo

13 / 42 page

F1 EVALUATION PLATFORM

USER’S GUIDE

DS41401A-page 13

Chapter 2. Getting Started

2.1

INTRODUCTION

This chapter gives instruction to get your F1 Evaluation Platform powered up and

running the default demonstration.

• Powering the F1 Evaluation Platform

• Default Firmware

• Programming the F1 Evaluation Platform with the PICkit™ 3

• Attaching a PICkit Serial (optional)

• Measuring the current consumption

FIGURE 2-1:

F1 EVALUATION PLATFORM (DM164130-1)

2.2

POWERING THE F1 EVALUATION PLATFORM

The PIC16LF1937 supplied with your F1 Evaluation Platform requires a supply voltage

of 1.8V-3.6V. Voltages above 3.6V will degrade or damage the device. There are four

ways to supply the necessary power.

Use PICkit 3,

Use the power connector at JP3,

Use PICkit Serial, or

Use the BLCD Expansion Header J3.

2.3

POWERING WITH PICkit™ 3

To power with the PICkit 3, perform the following steps:

Make sure a jumper or an ammeter is connected across JP2.

If you are using a BLDC expansion, remove the jumper at JP1.

DS41401A Fiches technique(PDF) 13 Page - Microchip Technology