MPXM2102AS datasheet(4/16 Pages) FREESCALE

4 / 16 page

MPX2102

Sensors

Freescale Semiconductor

Pressure

Maximum Ratings

Voltage Output vs. Applied Differential

The differential voltage output of the sensor is directly

proportional to the differential pressure applied.

The absolute sensor has a built-in reference vacuum. The

output voltage will decrease as vacuum, relative to ambient,

is drawn on the pressure (P1) side.

The output voltage of the differential or gauge sensor

increases with increasing pressure applied to the pressure

(P1) side relative to the vacuum (P2) side. Similarly, output

voltage increases as increasing vacuum is applied to the

vacuum (P2) side relative to the pressure (P1) side.

Figure 1 illustrates a block diagram of the internal circuitry

on the stand-alone pressure sensor chip.

Figure 1. Temperature Compensated Pressure Sensor Schematic

Table 2. Maximum Ratings(1)

1. Exposure beyond the specified limits may cause permanent damage or degradation to the device.

Rating

Symbol

Value

Unit

Maximum Pressure (P1 > P2)

PMAX

400

kPa

Storage Temperature

TSTG

-40 to +125

°C

Operating Temperature

-40 to +125

°C

Thin Film

Temperature

Compensation

and

Calibration

Circuitry

GND

+ VOUT

- VOUT

X-ducer

Sensing

Element

MPXM2102AS Fiches technique(PDF) 4 Page - Freescale Semiconductor, Inc

MPXM2102AS Fiches technique(HTML) 4 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Fiches technique Télécharger

Lien URL