260

KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com

Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.

11/01/03

HFC

high frequency ceramic capacitor

environmental applications (continued)

Electrical Characteristics

Parameter

Capacitance

Within the specified tolerance of parts

Frequency: 1 MHz

Voltage: 1 Vrms

Instrument: YHP4278A

Q Value

100 or more

Frequency: 1 MHz

Voltage: 1 Vrms

Instrument: YHP4278A

Breakdown Voltage

No breakdown

Test Voltage: 300% of the rated voltage

Electrification Time: 1 second to 5 seconds

Limit Surge Current: 50 mA or less

Insulation Resistance

10,000 MΩ or more

Test Voltage: Rated voltage

Electrification Time: 60 seconds ± 5 seconds

Requirement

Test Method

Mechanical Characteristics

Parameter

Adhesion of Electrodes

No mechanical damage

A static load of

5N (0.5 kgf) shall

be applied in the

direction of the

arrow as follows

Requirement

Test Method

Printed Board

Chip

Load (5N)

Weight

20

Displacement

Substrate

45

± 2

45

± 2

Core Body Strength

No mechanical damage

A static load of 5N (0.5 kgf) using a R 0.5 pressure

rod shall be applied on the core of the component

and held for 10 seconds

Substrate Bending Test

Visual Examination: No mechanical damage

Capacitance: Within ±2.0% or ±0.02 pF

whichever is more

Q value: 100 or more

Insulation Resistance: 10,000 MΩ or more

Solder a specimen to the substrate and bend it

(Displacement: 2mm)