L5980_08 datasheet(20/37 Pages) STMICROELECTRONICS

20 / 37 page

Application information

L5980

20/37

Equation 18

where K is the feed forward constant and 1/K is equals to 9.

Calculate C4 by placing the zero at 50 % of the output filter double pole frequency (fLC):

Equation 19

Calculate C5 by placing the second pole at four times the system bandwidth (BW):

Equation 20

Set also the first pole at four times the system bandwidth and also the second zero at

the output filter double pole:

Equation 21

The suggested maximum system bandwidth is equals to the switching frequency divided by

3.5 (FSW/3.5), anyway lower than 100 kHz if the FSW is set higher than 500 kHz.

For example with VOUT = 3.3 V, VIN = 12 V, IO = 0.7 A, L = 47 μH, COUT = 22 μF,

ESR < 1 mΩ

, the type III compensation network is:

In Figure 12 is shown the module and phase of the open loop gain. The bandwidth is about

57 kHz and the phase margin is 45°.

----------

---- R

⋅⋅

π R

⋅⋅

---------------------------

π R

4BW

⋅

–

⋅⋅⋅

--------------------------------------------------------------

4BW

⋅

-----------------

–

---------------------------

π R

4BW

⋅⋅ ⋅

-----------------------------------------

4.99k

1.1k

120

5.6k

6.8nF

10nF

100pF

L5980 Fiches technique(PDF) 20 Page - STMicroelectronics

L5980 Fiches technique(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Fiches technique Télécharger

Lien URL