Published Date : FEB 28,2008

Drawing No : SDSA6370

V1

Checked : B.L.LIU

P.4/5

Part Number:

ZM2BB45FS

3.5x2.8 mm PLCC2 SMD LED

www.SunLED.com

Tape Specification (Units : mm)

Remarks:

If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous Intensity / Luminous Flux: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.

Recommended Soldering Pattern

(Units : mm; Tolerance: ±0.1)

The device has a single mounting surface. The device

must be mounted according to the specifications.