Maximum ratings

M41T00

18/25

4

Maximum ratings

Stressing the device above the rating listed in the "Absolute maximum ratings" table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the operating sections of

this specification is not implied.

Exposure to absolute maximum rating conditions for extended periods may affect device

reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality

documents.

Caution:

Negative undershoots below -0.3 V are not allowed on any pin while in the backup mode.

Table 6.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

–55 to 125

°C

Ambient operating temperature

-40 to 85

°C

Input or output voltages

–0.3 to 7

V

(1)

1.

Reflow at peak temperature of 260°C (total thermal budget not to exceed 245°C for greater than 30

seconds).

Lead solder temperature for 10 seconds

260

°C

Supply voltage

–0.3 to 7

V

Output current

20

mA

Power dissipation

0.25

W