ST72260G datasheet(33/171 Pages) STMICROELECTRONICS

33 / 171 page

ST72260G, ST72262G, ST72264G

33/171

8 POWER SAVING MODES

8.1 INTRODUCTION

To give a large measure of flexibility to the applica-

tion in terms of power consumption, three main

power saving modes are implemented in the ST7

(see Figure 21).

After a RESET the normal operating mode is se-

lected by default (RUN mode). This mode drives

the device (CPU and embedded peripherals) by

means of a master clock which is based on the

main oscillator frequency divided by 2 (fCPU).

From Run mode, the different power saving

modes may be selected by setting the relevant

instruction whose action depends on the oscillator

status.

Figure 21. Power Saving Mode Transitions

8.2 SLOW MODE

This mode has two targets:

– To reduce power consumption by decreasing the

internal clock in the device,

– To adapt the internal clock frequency (fCPU) to

the available supply voltage.

SLOW mode is controlled by three bits in the

MISR1 register: the SMS bit which enables or dis-

ables Slow mode and two CPx bits which select

the internal slow frequency (fCPU).

In this mode, the oscillator frequency can be divid-

ed by 4, 8, 16 or 32 instead of 2 in normal operat-

ing mode. The CPU and peripherals are clocked at

this lower frequency.

Note: SLOW-WAIT mode is activated when enter-

ring the WAIT mode while the device is already in

SLOW mode.

Figure 22. SLOW Mode Clock Transitions

POWER CONSUMPTION

WAIT

SLOW

RUN

HALT

High

Low

SLOW WAIT

SMS

CP1:0

fCPU

NEW SLOW

NORMAL RUN MODE

FREQUENCY

REQUEST

fOSC2

fOSC2/2

fOSC2/4

fOSC2

ST72260G Fiches technique(PDF) 33 Page - STMicroelectronics

ST72260G Fiches technique(HTML) 33 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Fiches technique Télécharger

Lien URL