s p e c if ic a t i on s

Category 6/Class E, 8-position, UTP jack module shall terminate

4-pair, 28 AWG solid/stranded and 30 AWG solid, 100 ohm

unshielded twisted pair cable and shall not require a punchdown

tool. UTP jack modules shall use a forward motion termination

method to optimize performance by maintaining cable pair

geometry while eliminating conductor untwist. The termination cap

shall be color coded green to designate Category 6 performance

and shall include a universal label coded for T568A and T568B

wiring schemes.

technical information

Category 6/Class E

channel and component

performance:

Exceeds channel requirements of ANSI/TIA-568.2-D Category 6 and ISO

11801 Class E standards at swept frequencies 1 to 250 MHz

Exceeds component requirements of ANSI/TIA-568.2-D Category 6 and

ISO 11801 Class E standards at swept frequencies 1 to 250 MHz

FCC and ANSI compliance: Meets ANSI/TIA-1096-A; contacts plated with 50 microinches of gold for

superior performance

IEC compliance:

Meets IEC 60603-7 and IEC 60512-99-002

RoHS compliance:

Compliant

PoE and PoH compliance: Meets IEEE 802.3af/802.3at and 802.3bt type 3 and type 4

Supports Power over HDBaseT up to 100 watts

c(UL)us Listed:

UL 1863 (Use as communications circuit accessory); CSA standard C22.2

UL 2043 (Suitable for use in air-handling spaces)

Conductor termination

range:

Wire cap compatible with 28 AWG solid/stranded and 30 AWG solid cable

with conductor insulation diameters of 0.025 in. max. and overall cable

O.D. 0.120 in. to 0.185 in.

Operating temperature:

-10°C to 75°C (14°F to 167°F)

key features and benefits

100% performance tested: Confidence that each jack module will deliver the critical electrical

performance requirements

Utilizes enhanced

Giga-TX™ Technology:

Optimizes performance by eliminating conductor untwist and reduces

installation time and expense

Improved termination cap: Conductor retention slots simplify jack module termination

Modular:

UTP jack modules snap in and out of all Mini-Com Faceplates, Modular

Patch Panels, and Surface Mount Boxes for easy moves, adds,

and changes

True strain relief:

Controls cable bend radius for long-term installed performance

Individually serialized:

Marked with quality control number for future traceability

RJ45 interface:

Industry standard interface provides a quick and easy plug and play

connection to RJ45 patch cords; backwards compatible

Identification:

Can be clearly identified with optional labels and icons for port

Identification

Termination tool

(optional):

EGJT-1 termination tool enables full termination of conductors by utilizing

a smooth forward motion without impact on critical internal components

for maximum reliability; TGJT termination tool ideal for high volume

installations

Block out device

(optional):

Provides a simple and secure method to control access to data ports while

not in use

a pp l ic a t i on s

Mini-Com TX6 PLUS UTP Jack Modules are a component of the TX6 PLUS UTP Copper Cabling

System. This end-to-end system is interoperable and backwards compatible, providing design flexibility

to protect network investments well into the future. With certified performance to the ANSI/TIA-568.2-D

Category 6 and ISO 11801 Class E standards, this system is ideal for high performance workstation

applications. With certified performance to the ANSI/TIA-568.2-D Category 6 and ISO 11801 Class E

standards, these systems will support the following applications:

• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)

• Digital video and broadband/baseband analog video

• Voice over Internet Protocol (VoIP)

Mini-Com® TX6™ PLUS UTP 28/30 AWG

Jack Modules

S PE C I FI C A T I ON S HE E T

w w w.panduit .com

Mini-Com TX6 PLUS UTP Jack Modules

Jack Module:

CJT688TGIW*

TX6 PLUS 28 AWG Patch Cords

Feet:

UTP28SP**

Meters:

UTP28SP***M

Mini-Com Angled Modular Patch Panels

24-port, 1 RU:

CPPLA24WBLY

48-port, 2 RU:

CPPLA48WBLY

Mini-Com Flat Modular Patch Panels

24-port, 1 RU:

CPPL24WBLY

48-port, 2 RU:

CPPL48WBLY

For additional modular patch panels and

punchdown patch panels, visit www.panduit.com

Tools and Accessories

Jack Module

Termination Tool:

EGJT-1 or TGJT

Wire Snipping Tool:

CWST

Wire Stripping Tool:

CJAST

Clear Dust Cap:

MDC-C

Blockout Device:

PSL-DCJB-^^^

Phone Icons:

CIPIW-C

Data Icons:

CIDWH-C+

*To designate color other than IW (Off White),

replace IW suffix with EI (Electric Ivory),

IG (International Gray), AW (Arctic White),

BL (Black), WH (White), BU (Blue), RD (Red),

YL (Yellow), GR (Green), OR (Orange), or

VL (Violet). **For lengths 1 to 20 feet

(increments of one foot), change the length

designation in the part number to the desired

length. For standard cable colors other that

Off White, add suffix BL (Black), BU (Blue),

GR (Green), RD (Red), YL (Yellow),

OR (Orange), or VL (Violet). For example,

the part number for a blue 15-foot patch

cord is UTP28SP15BU.

***For lengths 0.5 to 6 meters (increments of

half meter). For standard cable colors other

than Off White, add suffix BL (Black),

BU (Blue), GR (Green), RD (Red), YL (Yellow),

OR (Orange), or VL (Violet). For example, the

part number for a blue 5-meter patch cord

is UTP28SP5MBU.

^^^To designate color other than Red, add

suffix Black (BL), Blue (BU), Yellow (YL),

Green (GR), Orange (OR), Off White (IW) or

International Gray (IG) at the end of the part

number. 10/package.

+To designate color other than WH (White),

replace WH with BU (Blue), RD (Red),

YL (Yellow), GR (Green), OR (Orange) in the

part number. 100/package.

Contact customer service for bulk packaged

jack modules and patch cords.