Quick start instructions

1. Remove the monitor and cable from the box

2. Please read the product information leaflet before using the monitor

3. Remove the monitor from its sleeve

4. Unclip the stand from the back of the monitor, and rotate it open to reveal the connectors

5. Plug in the power and HDMI cables

6. Place the monitor on a flat, stable surface, or mount it using the VESA or screw

mount attachment points

Suitable spacers (not supplied) must be used between the monitor and the VESA

bracket; make sure you use spacers that are wide enough to allow sufficient space for

the power and HDMI cables

7. Turn on the computer or power adapter; the monitor will power on

0˚—90˚

Using the monitor with the integrated

angle-adjustable stan

Using the monitor with a VESA mount

TIPS

• Adjust volume and brightness with the control buttons on the back of the monitor

• Turn the monitor on and off with the power button on the back

• Find your preferred viewing angle by adjusting the integrated stand

• Tidy the cables using the notch at the base of the monitor

!

4

Raspberry Pi Monitor – Raspberry Pi Ltd